Introducing... RouteCans!

→ RouteCans are an economical, eco-friendly, lightweight, sturdy, easy-to-use RouteArrows dispenser.

→ They're made from an unused (100% recycled Polypropylene) paint can - thus the name!

→ RouteCans provide a fast and easy way to dispense and use RouteArrows at your event.

→ The original RouteArrows dispenser (“RouteCase”) was great, but this new version is even better!

Put the first RouteArrows roll into the RouteCan, “right-side up” with “RouteArrows” text along the bottom.

Feed about 4+ in. of the first RouteArrow roll out through the vertical feed slot.

Put the second roll of RouteArrows into the RouteCan on top of the divider table.

Feed about 4 in. of the second RouteArrow roll out through the slot.
- As either roll is pulled/dispensed, the other roll will not be affected or moved.

Extras:

The “RouteCan” body is made with a new 1 gallon paint container, which is 100% Recycled Polypropylene, made here in the USA!
The handle is all wood, made with 5 ply Birch Plywood and 1.25 inch dowel.
Handle fasteners are aluminum pop rivets, handle screws are stainless steel.
The wooden parts are finished with hand-applied, unprocessed 100% Natural Tung Oil.
The divider table is made from ABS plastic, which separate the upper and lower rolls, so that one doesn’t rotate the other!
High Visibility Stripe and Arrow Logo adds visual acuity while route marking.

There is a large reflective “RouteArrows” logo on one side and a 2” wide “Hi-Viz” reflective tape on the other side for both daylight and low-light situations.